Instant heater Rinnai Infinity NB26 R-Reunk2635ffce

Rinnai Infinity NB26

Total Inner / Exterior Versatility, Advanced Multigas Technology and continuous production of great flow under the quality standards of Rinnai.

Engineering Study: Structural and Hydraulic Adaptability

In the design of sanitary hot water networks for modern projects, the flexibility of the location of the thermal generator and its fuel compatibility are critical technical feasibility factors. The instant heater Rinnai Infinity NB26 has been projected to break the usual limitations of space and supply. Its high-protection chassis allows a dual installation: it can be located in indoor environments through coaxial extraction ducts forced or fixed directly on outdoor paraments, transforming its type A shot by the mandatory addition of the wind baffle accessory R-REU- OVC At the same time, its multigas injection block guarantees immediate adaptation to natural gas infrastructures or liquefied oil gas (GLP). This versatility, attached to the microprocessor continuous flow software, mathematically stabilizes the water temperature before pressure variations or simultaneous openings, optimizing the performance and eliminating the inefficiencies of the accumulation systems Traditional.

📈 Certified flexibility: Specific security approvals for each gas and location typology.

High performance health comfort, fuel polyvalence and premium durability

The instant heater Rinnai Infinity NB26 is defined as a masterpiece of thermal instrumentation, designed to transform the supply of sanitary hot water into an autonomous, continuous and maximum reliability service. With a large-flow production capacity that stands out in its segment, this device breaks traditional schemes thanks to its multigrain nature and its polyvalent installation capacity. Endowed with a purified copper heat exchanger and high-resilience reinforced coating against thermal shocks, it guarantees exceptional structural durability even low intensive work rhythms.

When the equipment is intended for an indoor installation, its watertight operation ensures absolute perimeter safety in the technical place, isolating combustion by a coaxial system forced by its inverter extractor. However, if space needs or local regulations advise an outdoor assembly (terraces, facades or open galleries), the team responds with total solvency. By incorporating the R-REU-OVC wind deflector accessory, the heater is completely protected against direct weather inclemencies and dynamic air currents, operating with the same mathematical efficiency as indoors.

The integration of advanced electronic flow and temperature sensors in the input and output collectors allows instantaneous analytical monitoring. Its proportional gas valve of linear modulation adapts the energy consumption to the exact hydraulic flow demanded. When you dispense with accumulative deposits that generate passive radiation thermal losses 24 hours a day, the heater Rinnai Infinity NB26 only consumes gas at the precise moment in which water circulates, which results in a direct economic savings in the fuel supply.

Criteria for assembly and integration in technical and exterior rooms

To ensure exceptional longevity and operation free of mechanical incidents, it is advisable to install the heater Rinnai Infinity NB26 in a level of solid level level, respecting the minimum perimeter distances recommended by the manufacturer. In indoor installations, the coaxial gas evacuation kit should guarantee a total hermetic sealing by high temperature silicone joints.

If you opt for exposed outdoor assembly, it is imperative to fix the R-REU-OVC deflector accessory on the gas outlet of the heater. This component of aerodynamic engineering breaks the front thrust of the wind, preventing revoking in the combustion chamber and safety locks in the pressure switch. Likewise, it should be verified that the configuration of the injectors corresponds accurately with the gas family distributed in the farm (natural gas or GLP), performing the start-up with the recommended dynamic power pressures.

See sizes and optimize the supply DHW of your project?

On https://tualmacendelclima.com/en/ we are engineers specialized in general hydraulics, efficient air conditioning by advanced airplane and automation of residential and professional distribution networks. If you need to resolve complementary doubts, calculate load losses in your collectors or define the necessary external evacuation and installation accessories, our technical engineering department is at your entire disposal.