

Envío GRATIS en España (Península) a partir de 300€ + info
Email has been sent successfully.
It carries performance and thermal saving at its maximum expression in large facilities with the Kosner Aquaris D Ht 16The most powerful high-temperature high-temperature monobloc inverter heat pump with 16 kW of nominal capacity. Designed with avant-garde ecological natural refrigerant A-290 (propane), this unit is able to drive water directly to the 75 ° C. Without activating electrical support resistances. It is the definitive solution for large-scale reform projects, neighborhood communities or replacement of gas boilers in commercial buildings, allowing the conventional radiator network to be maintained intact. Certified with an excellent energy rating of up To +++, offers powerful heating, cooling and DHW With integrated advanced WiFi connectivity.
Security policy
Delivery policy
Refund policy
The final solution of 16 kW for high temperature in large sustainable climate control projects
The air pump airplane Kosner Aquaris D HT 16 high temperature monobloc represents the highest step in the thermal capacity of the range, offering an exceptional engineering solution for large single-family homes, large-area residential villas and commercial premises or tertiary use. With its 16.1 kW of nominal power in heating, this powerful Inverter system unifies centralized heating services, high demand cooling in summer and massive health hot water production (DHW). Being designed in a 100% hydronic monobloc format, the entire cooling circuit comes hermetically sealed from the factory in the outer module, facilitating the technical assembly work and eliminating the risks due to fluorinated gas handling.
Ecological excellence and maximum energy savings merge in the Kosner Aquaris D HT 16 through the integration of natural gas propane R-290. This refrigerant stands out for its low environmental impact and its total compliance with the most restrictive European regulations. Squeezing the magnificent thermodynamic capabilities of this natural gas, the team reaches an exceptional energy classification of A +++ / A ++ (W35 ° C / W55 ° C). With a 4.60 scop working with water at 35 ° C and a SEER up to 6.47 with water at 18 ° C, this heat pump guarantees an optimized electricity consumption, drastically minimizing the electricity bill even in the most severe winters.
The new Aquaris D HT range has been meticulously developed to optimize space and facilitate the tasks of technical professionals abroad. Inside its robust fan chassis optimized, the equipment houses a full integrated hydraulic assembly that includes: an electronic water pump variable, 6-liter expansion vessel, 3 bar safety valve, flow switch of Water, integrated water pressure sensor and a refrigerant / water separator with automatic disappointing valve. The serial supply also includes rubber antivibratory for its lower base and a type water filter and to protect the welded plate exchanger. It also has an electric box to speed up technical preventive maintenance tasks.
Thanks to its advanced Inverter compression technology, Aquaris D HT 16 allows you to perform the energy transition by replacing old boilers without changing the existing iron or aluminum radiators in the building, since it is capable of reaching a water drive temperature of up 75 ° C directly and totally hydroly. Climate operating limits are leaders in your segment: in heating and production modes of DHW it maintains an optimal and uninterrupted operation even against severe frosts or extreme winter conditions below -20 ° C outer. During the summer season, it reverses its cycle with the same solvency to provide refreshing refreshing through high-power flatlantes or refreshing soil networks, operating stable with outer temperatures up to 43 ° C.
Each unit is delivered as standard next to the KDA-120 digital cable controller (provided with a 20-meter communication cable) supplied loose for its interior placement. This intuitive-screen wall knob acts as an advanced environmental thermostat and has integrated WiFi connectivity, linking the equipment to the exclusive application of Kosner for any mobile device. Through the APP, the user can regulate the setpoint temperatures, establish detailed weekly schedules and visualize the detailed energy measurement of the equipment in real time. For complex residential automation or commercial sector projects, it incorporates the Modbus protocol as standard to facilitate the link to centralized BMS systems.
Despite its large size and high thermal capacity of 16 kW, Kosner it has implemented an exhaustive design of perimeter mechanical insulation to minimize the acoustic impact on residential or commercial centers. The unit incorporates acoustically optimized fans, vibration reducing blocks, perimeter acoustic insulation by metal layers combined with high-density cotton, and double-layer rubber antivibratories at the base of your compressor. Record a sound pressure of only 50 dB (A) to 1 meter away, including two silent operating modes programmable by schedule to ensure total discretion and acoustic well-being during night rest hours.
All the information contained in the following technical data table faithfully reflects the official specifications of the manufacturer Kosner for the single-phase model Aquaris D HT 16, extracted from the official reference technical document "Aquaris D HT R-290 Monobloc Kosner.pdf ":
| Technical specification | Official specification of model D 16 (single-phase) |
|---|---|
| Thermal power Nominal heating (A7 / W35) | 16,10 kW |
| Power absorbed in heating (A7 / W35) | 3,39 kW |
| SCOP seasonal performance (water at 35 ° C) | 4,60 |
| Thermal power Middle heating (A7 / W45) | 15,80 kW |
| Thermal power High heating (A7 / W55) | 15,90 kW |
| SCOP seasonal performance (water at 55 ° C) | 3,40 |
| Certified Energy Efficiency (W35 / W55) | Class A +++ / Class A ++ |
| Refrigeration Refrigeration Power (A35 / W18) | 16.00 kW |
| Seer seasonal performance (Water at 18 ° C) | 6,47 |
| Refrigeration Refrigeration Power (A35 / W7) | 16.00 kW |
| Seer seasonal performance (water at 7 ° C) | 4,57 |
| Electrical supply Network | Single-phase 230 V / 1/50 Hz |
| Maximum power absorbed by the heat pump | 6,80 kW |
| Maximum absorbed current (BC / BC + resistance) | 29.5 A / 43.1 A |
| Flow of hydraulic pump / pressure available | 2.75 m³ / h / 4.0 MCA |
| Hydraulic expansion cup capacity as standard | 6-liter |
| Hydraulic water circuit connections | 1 "Gas / Male (minimum interior pipe: 39 mm) |
| Minimum water volume required in the installation | 80 liters |
| Gas-type Refrigerant Gas Natural / factory load | R-290 (propane) / 1.65 kg |
| Sonor power level / sound pressure to 1 meter | 63 dB (A) / 50 dB (A) |
| Net outer dimensions (high x wide x prof.) | 1.365 x 1.155 x 448 mm |
| Net weight of the unit / gross weight packed | 184 kg / 208 kg |
| Factory Homologation Code | 5500015004 |
On https://tualmacendelclima.com/en/ we support your investments with a technical department composed of experienced engineers with more than 15 years of trajectory in the sector. The Kosner Aquaris D HT 16 is a high-end heat pump designed for large surfaces whose high temperature features can be substantially maximized by correct hydraulic design and the original accessories integration:
We assure you the most competitive purchase conditions on the electronic market. Take yourself today your Kosner Aquaris D HT 16 enjoying the exclusive advantages of our platform: ** Free Shipping ** (EspaÑa Peninsula), immediate flexible financing options for your needs and the continued support of our team of specialized engineers.
Data sheet
No customer reviews for the moment.