Saline Chlorinator Go Salt GS-7 Astralpool

Astralpool Go Salt GS-7

The perfect balance of natural chlorination available to all. Maximum purity of water by self-industrial electrolysis of titanium, compact design and automated security.

Engineering technical study: natural chlorination without additives

The ecological treatment of bath water by saline electrolysis rests on a purely cyclical and natural principle. When dissolving a small concentration of common sodium chloride in the pool vessel, the control unit Go Salt GS-7 it uses its electrodes loaded to dissociate the salt molecules, releasing in situ an active disinfectant agent of high purity. This compound acts by destroying pathogenic microganisms and algae immediately, to later combine again and re-transformed into salt under solar radiation. This continuous cyclical process suppresses the need to incorporate industrial chemical disinfectants or chlorinated stabilizers, protecting the mechanical filtration components and optimizing water transparency coefficients naturally. Our engineering department evaluates the hydraulic dynamics of each vessel to coordinate an impeccable automated disinfection.

📊 All mechanical, electrical and safety coefficients strictly correspond to the official technical documentation of the GO SALT range.

High Level Residential Electrolysis: Long Life Titanium Cell and Total Automation

The Saline GO Salt GS-7 chlorinator of Astralpool is presented as the ideal solution to completely automate the disinfection of residential pools of small and medium-sized dimensions, covering vessels up to 30 m³. Its advanced electronics processes water conductivity with a salinity operating range of 5 to 12 g / l (the value of 5 to 6 g / l being the best recommended), ensuring a continuous disinfection flow of 6 to 7 grams of chlorine pure per hour. The interface of the control panel has been designed under a criterion of maximum clarity for the user, allowing modulating the chlorine production rate at 5 differentiated levels (100% to 100% scale) by simply pressing its front selection keys.

The operating heart of the equipment resides in its electrolysis vessel, which houses a set of 3 electrodes manufactured in self-cleaning activated titanium. The cell has a polarity investment technology configured by hardware (via bridges or jumpers at 2h or 3h) and test software, responsible for mechanically detaching the calcareous sedimos deposited in the titanium plates. Thanks to this principle of self-cleaning, the system guarantees an effective lifespan of the electrodes between 8,000 and 10,000 hours of continuous operation, avoiding costly corrective maintenance and ensuring a constant galvanic transfer.

The construction and operational safety of GO SALT GS-7 is complemented by a complete set of integrated alarms that protect both the electronics and the pool of the pool. Natively incorporates the salinity alarm by means of a common LED indicator to alert if the salt level is excessively high or low, as well as a general flow alert (which makes all the LEDs of the scale blinking) backed by a detection system for Gas flow in the cell itself. In addition, it has an intelligent tension-free auxiliary input for cover production by cover: When the closed cover status is activated, the equipment automatically attenuates 10% dosage to avoid unnecessary chlorine accumulations on the water surface.

Control and system enlargement functions

The Go Salt platform highlights by offering a high degree of auxiliary compatibility to integrate with environmental control peripherals in industrial or domestic filtration rooms:

• External production control: The equipment integrates a configuration jumper (OR_0, OR1C) with voltage-free contact entry that allows to link external ORP (Redox) drivers to automate the ignition or shutdown of the chlorination according to the actual water demand.
• Function PUMP-STOP: In the versions with integrated pH regulation or when linking external dosing pumps, the software activates perimeter protection that disconnects the corrector injection if it detects an excess of continuous pumping, avoiding product accumulations in the vessel.
• Investment of dynamic polarity: Independent light indicators on the front of the table signal the active autolimient cycle (Direct / Reverse), allowing the maintainer to check the correct galvanic balance of the plates.

Would you like technical advice for the treatment of your pool?

On https://tualmacendelclima.com/en/ we are engineers specialists in hydraulic design, air conditioning by air stopermia and automation of residential biological disinfection systems. If you want to resolve consultations about the cell bypass installation diagram, the variants of the GO SALT range with integrated pH pump series or validate the flow rate compatibility of your filtration pump, our technical team is at your entire disposal.