Saline Chlorinator Go Salt GS-40 Astralpool

Astralpool Go Salt GS-40

The perfect balance of natural chlorination available to all. Maximum purity of water by self-industrial electrolysis of titanium, compact design and automated security.

Engineering technical study: natural chlorination without additives

The ecological treatment of bath water by saline electrolysis rests on a purely cyclical and natural principle. When dissolving a small concentration of common sodium chloride in the pool vessel, the control unit Go Salt GS-40 it uses its electrodes loaded to dissociate the salt molecules, releasing in situ an active disinfectant agent of high purity. This compound acts by destroying pathogenic microganisms and algae immediately, to later combine again and re-transformed into salt under solar radiation. This continuous cyclical process suppresses the need to incorporate industrial chemical disinfectants or chlorinated stabilizers, protecting the mechanical filtration components and optimizing water transparency coefficients naturally. Our engineering department evaluates the hydraulic dynamics of each vessel to coordinate an impeccable automated disinfection.

📊 All mechanical, electrical and safety coefficients strictly correspond to the official technical documentation of the GO SALT range.

High capacity electrolysis: Long Life titanium cell and total automation

The Saline GO Salt GS-40 chlorinator of Astralpool is presented as the ideal solution to completely automate the disinfection of large volume residential pools, covering vessels up to 180 m³. Its advanced electronics processes water conductivity with an operating range of salinity from 5 to 12 g / l (the value of 5 to 6 g / l being the recommended optimum), ensuring a continuous disinfection flow of 31 to 40 grams of chlorine pure per hour. The interface of the control panel has been designed under a criterion of maximum clarity for the user, allowing modulating the chlorine production rate at 5 differentiated levels (100% to 100% scale) by simply pressing its front selection keys.

The operating heart of the equipment resides in its electrolysis vessel, which houses a set of 13 electrodes manufactured in self-cleaning activated titanium. The cell has a polarity investment technology configured by hardware (via bridges or jumpers at 2h or 3h) and test software, responsible for mechanically detaching the calcareous sedimos deposited in the titanium plates. Thanks to this principle of self-cleaning, the system guarantees an effective lifespan of the electrodes between 8,000 and 10,000 hours of continuous operation, avoiding costly corrective maintenance and ensuring a constant galvanic transfer.

Operational security of GO Salt GS-40 is complemented by a complete set of integrated alarms that protect both electronics and pool of the pool. Natively incorporates the salinity alarm by means of a common LED indicator to alert if the salt level is excessively high or low, as well as a general flow alert (which makes all the LEDs of the scale blinking) backed by a detection system for Gas flow in the cell itself. In addition, it has an intelligent auxiliary input free of tension for cover production by cover: When the closed cover status is activated, the equipment applies a reduction of automatic production by setting it to 10% to avoid excessive accumulation of chlorine gas in stagnant water.

Control and system enlargement functions

The Go Salt platform highlights by offering a high degree of auxiliary compatibility to be integrated with environmental control peripherals in residential or semi-public filtration rooms:

• External production control: The equipment integrates a configuration jumper (OR_0, OR1C) with voltage-free contact entry that allows to link external ORP (Redox) drivers to automate the ignition or shutdown of the chlorination according to the actual demand of water disinfection.
• Function PUMP-STOP: In versions with integrated pH regulation or by linking external dosing pumps, the software activates perimeter protection that disconnects the corrector injection if it detects an excess of continuous pumping, avoiding overdose.
• Investment of dynamic polarity: Independent light indicators on the front of the table signal the active self-cleaning cycle (Direct / Reverse), allowing to check the correct galvanic balance of titanium plates.

Would you like technical advice for the treatment of your pool?

On https://tualmacendelclima.com/en/ we are engineers specialized in hydraulic design, air conditioning by air stopermia and automation of residential or collective biological disinfection systems. If you want to resolve technical doubts about the 40 g / h cell bypass installation, the variants of the GO SALT range with integrated pH pump series or validate the flow rate compatibility of your filtration pump, our technical team is at your entire disposal.